Connect with us

How to remove that wrist strap from your Joy-Con Bumper

Apple News

How to remove that wrist strap from your Joy-Con Bumper

Here’s your Step by Step guide on how to remove that nylon strap.

When playing games such as Super Mario Odyssey, you may realize that your wrist straps seem to just get in the way of motion controls. We have figured out how to fix that problem.

In order to achieve this, you’re going to need a screwdriver and a pair of good eyes. This takes a bit of handy work, so don’t try this if you’re not too handy.

Step One: Remove the Metal Plate

With your handy screwdriver, remove the three screws on the metal plate. This will reveal a plastic insert underneath of the metal one.

There is a small piece of black plastic and a spring that is loosely held in place by that metal plate. DO NOT LOSE THIS This is essential to locking the bumper in place.

Step Two: Remove Plastic Insert

Carefully, remove the plastic insert by pulling up gently on the bottom and moving it to the left so that you can remove the locking bar with it. Make sure you remove this gently so you don’t hurt the plastic…

Here is your Step by means of Step information on how to remove that nylon strap.

When taking part in video games corresponding to Tremendous Mario Odyssey, chances are you'll notice that your wrist straps appear to simply get in the best way of movement controls. We've discovered how to repair that drawback.

So as to do so, you are going to desire a screwdriver and a couple of fine eyes. This takes slightly of to hand paintings, so do not do that in case you are now not too to hand.

Step One: Remove the Steel Plate

With your to hand screwdriver, remove the 3 screws at the steel plate. This may divulge a plastic insert beneath of the steel one.

There's a small piece of black plastic and a spring that is loosely held in position by means of that steel plate. DO NOT LOSE THIS This is very important to locking the bumper in position.

Step Two: Remove Plastic Insert

Sparsely, remove the plastic insert by means of pulling up gently at the backside and transferring it to the left so that you'll be able to remove the locking bar with it. Remember to remove this gently so you do not harm the plastic or any mechanisms beneath this insert.

Step 3: Remove the Strap

Prior to you'll be able to remove the strap, you're going to have to remove the white locking mechanism at the outdoor of the bumper. After you do that, sparsely remove the strap with your screwdriver and pull it out the top facet.

Step 4: Put all of it again in combination

Now that you've got formally got rid of your strap, you've got to put the bumper again in combination. Get started by means of placing the white locking mechanism into the plastic mechanism and pulling that throughout the designated hollow at the base of the bumper.

After you whole that, put the small spring within the little house designed for it and position the little black plastic piece on best of it.

In any case, position the steel plate again on best and screw it in!

4 simple steps, and you're formally strap unfastened!

Questions?

Tell us under!

Comments

More in Apple News

Popular

Featured

Advertisement
To Top